5161 Reinforcement, Body
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (BODY REINFORCEMENT)
| 1AZ Torsion strut to mounting | F45/F46/F48/F49/F54/F52/F60 | M12X1.5X48 | Replace screws | |
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Cross-brace to Firewall | F45/F46/F48/F49/F60/F52 | Replace nut | ||
| Joining torque | 56 Nm | |||
| Angle of rotation | 45° | |||
| 3AZ Strut brace to support bearing | F45/F46/F48/F49/F60/F52 | Replace screw | ||
| Joining torque | 56 Nm | |||
| Angle of rotation | 90° | |||
| 4AZ Front strut brace to shock tower (dome-dome-strut) | F48/F49/F60 | Replace screw | ||
| Joining torque | 28 Nm | |||
| Angle of rotation | 180° | |||
| 5AZ Torsion strut to mounting | F57 | Hexagon screw M12X1.5X48 |
Replace screws | |
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| Torx screw M10X16 | 38 Nm |
TIGHTENING TORQUE SPECIFICATION
| Connecting support to rear console tunnel | ||
| Flat-head screw M8x16 | Tightening torque | 19 Nm |
| Torsion strut to side member | ||
| M12 | Joining torque | 100 Nm |
| Angle of rotation | 70° | |