Removing and installing/replacing complete lock cylinder in left or right front door (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove the OUTER DOOR HANDLE SUPPORT .

Removal:

Detach trim (1) at catch (2) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Twist lock cylinder (1) in arrow direction and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Rotate lock cylinder (1) opposite to arrow direction and engage.

Courtesy of BMW OF NORTH AMERICA, INC.

Engage cover (1) on detent (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Install the OUTER DOOR HANDLE SUPPORT .