Removing and installing/replacing trim on rear left or right wheel arch (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Removal:

Release trim (1) on the clips (2, 3).

Release trim (1) in the area of the bumper from the detents.

If necessary, unlock associated plug connection and disconnect.

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing with USA national version:

Remount SIDE MARKER LIGHT .

Installation:

NOTE: Check grommets (1) for damage and replace if required.

Courtesy of BMW OF NORTH AMERICA, INC.

replace faulty clips (2, 3).

If necessary, connect plug connection.

Attach trim (1) and engage at clips (2, 3).

Engage trim (1) in the area of the bumper in the detents.

Courtesy of BMW OF NORTH AMERICA, INC.