Removing and installing/replacing the windshield panel cover, right (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove both WINDSHIELD WIPER ARMS .
Remove left WINDSHIELD PANEL COVER .

Removal:

Release screw plug (1).

Unclip and take out the right cover (2) upwards from the holding rail.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit and clip in right cover (2) in the holding rail.

Lock screw plugs (1).

NOTE: Make sure right cover is correctly fitted on retaining rail.

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Attach left WINDSHIELD PANEL COVER .
Install both WIPER ARMS .