Removing and installing/replacing the windshield panel cover, left (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Removal:

Detach seal (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen cap nuts (1).

Open locks (2) by turning them counter-clockwise.

Remove windshield panel cover (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Thread in the windshield panel cover (3).

Turn the locks (2) to the right until the stop is reached.

Tighten cap nuts (1).

Tightening torque 61 21 6AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Mount seal (1).

Courtesy of BMW OF NORTH AMERICA, INC.