Removing and installing/replacing support for rear bumper panel (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work needed:
- Remove rear BUMPER COVER .
Removal:
Slacken nuts (1) and remove support (2).
Installation:
NOTE:
Replace nuts (1).
Position support (2) and secure with nuts (1).
Tightening torque 51 12 1AZ .
Required follow-up work:
- Install rear BUMPER COVER