Removing and installing/replacing support for front lower bumper cover (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove front BUMPER COVER .

Removal:

Unscrew the screws (1).

Detach holder of air duct (2) upwards out of support (3).

Remove carrier (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert support (3).

Attach holder of air duct (2) in support (3).

Tighten down screws (1).

Tightening torque 51 11 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install front BUMPER COVER