5111 Bumper, Front
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (FRONT BUMPER)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper cover to front panel | F54/F55/F56/F57 | M6 | 6 Nm | |
| 2AZ Support, front top, to deformation element, front top | F54/F55/F56/F57/F60 | M8 | Nut M8x95 screw |
28 Nm |
| 3AZ Support, front bottom, to deformation element, front bottom | F54/F55/F56/F57/F60 | M6x30 | Screw | 8 Nm |
| 4AZ Vertical connection to deformation element | F54/F55/F56/F57/F60 | M6x20 | 11.8 Nm | |
| 5AZ Deformation element, bottom to adapter, front axle support | F54/F55/F56/F57/F60 | 11.8 Nm | ||
| 6AZ Deformation element, top, to engine carrier | F54/F55/F56/F57/F60 | Replace screw | ||
| Tightening torque | 100 Nm | |||
| Angle of rotation | 180° | |||
| 7AZ Adapter, front axle support to front axle support | F54/F55/F56/F57/F60 | 100 Nm | ||
| 8AZ Reinforcement strut at the support | F54/F55/F56/F57/F60 | 11.8 Nm | ||
| on cross connection | F60 | 25 Nm | ||
| 9AZ Air duct to deformation element top/bottom | F55/F56 | 4.6 Nm | ||
| F54/F57 | 8 Nm | |||
| F60 | 6 Nm | |||
| 10AZ Air duct to cross connection | F60 | 6 Nm |
TIGHTENING TORQUE SPECIFICATION
| Washer fluid reservoir holder to adapter plate of front axle support | ||
| Tightening torque | 10 Nm | |