Removing and installing/replacing front left protective plate (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work needed:
- Remove front BRAKE DISC .
Removal:
Release screws (1) and remove brake guard plate (2).
Installation:
Mounting the brake guard plate (2).
Insert screws (1) and tighten.
Tightening torque 34 11 4AZ .
Required follow-up work:
- Install the front BRAKE DISC .