Removing and installing/replacing center console control panel

Preliminary work needed: 

• Remove IHKA CONTROL PANEL .

Removal: 

Remove screw (1).

Unclip center console control panel (2) from the trim (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clip center console control panel (2) into trim (3).

Tighten screw (1).

Tightening torque 61 31 4AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install IHKA CONTROL PANEL .