Removing and installing (replacing) middle decorative strip on dashboard
When carrying out repair work on trim panels, make sure that the sensitive surfaces are not scratched or damaged.
Preliminary work needed:
- Remove CENTER LEFT FRESH AIR GRILLE .
Removal:
Lever out decorative strip (1) from the clamps (2) and remove.
Release accent strip (1) from the clips (2) and remove upwards.
Installation:
Clip accent strip (1) into clips (2).
Engage decorative strip (1) at the clamps (2).
Required follow-up work:
- Install CENTER LEFT FRESH AIR GRILLE .