Replacing bulb for left or right auxiliary turn signal lamp (Cooper)

WARNING: Follow INSTRUCTIONS for handling light bulbs (exterior lighting).

Preliminary work needed:

Removal:

Twist light holder (1) counter-clockwise and remove from auxiliary turn signal lamp (2).

Pull bulb for auxiliary turn signal lamp (3) out of light holder (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Note BULB TYPE .

Insert bulb for auxiliary turn signal lamp (3) into light holder (1).

Join bulb socket (1) in auxiliary turn signal lamp (2) and twist clockwise up to stop.

NOTE: Ensure detent of light holder (1) is correct in auxiliary turn signal lamp (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: