Removing and installing or replacing trim for roof pillar at front (A-pillar), left or right (Cooper Convertible)
Preliminary work needed :
- Remove TRIM for front roofliner.
Removal :
Remove the trim panel (1) on the clips (2).
Take out trim panel (1) upwards from dashboard.
Disconnect the associated plug connections and remove trim panel (1) depending on the equipment.
Replacement (depending on equipment):
Remount TWEETER .
Installation:
Pre-install clips (1) on trim panel (2).
Clips (1) must not be damaged or missing.
Insert the trim panel (1) and engage with the clips (2).
Make sure that it is seated correctly on edge protection.
Required follow-up work:
- Install TRIM for front roofliner.