REP-TAT-P-5434-01 Removing the convertible top brace bearing

Preliminary work 

• Open LOADING AID 

• Right side only: 

  Unlock plug connection (1) and disconnect.

  Unclip the connector (2) from the convertible top brace bearing (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the protective cap (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Highlight the position of the screws (1) and (2) on the convertible top brace bearing (4).
• Loosen screws (1), (2) and (3).
• Remove the convertible top brace bearing (4).

Courtesy of BMW OF NORTH AMERICA, INC.