REP-TAT-P-5218-02 Installing the head restraint guide
NOTE:
TECHNICAL INFORMATION
The head restraint guides are not identical in construction.
The head restraint guides are not identical in construction.
- Ensure that the headrest guide (2) is installed on the left side with the lock for head restraint when facing the direction of travel.
- Insert the head restraint guides (2) correctly from the top in the backrest frame (3).
The detents (1) must engage audibly.
Required follow-up work
Install FRONT SEAT
Install INNER COVER
Install the COVER for backrest adjustment
Install the STEERING LEVER for backrest adjustment
Install the LEVER for seat height adjustment
Install the OUTER COVER on the front seat
Install TRIM for backrest release
Install the REAR PANEL from the front seat backrest
Install the TRIM at the bottom of the aperture
Install SIDE AIRBAG from front seat
Install the BACKREST COVER with the cushion
Install the HEAD RESTRAINT