REP-TAT-P-5218-01 Removing the seat frame

Preliminary work 

Remove FRONT SEAT 

Remove INNER COVER 

Remove the COVER  for backrest adjustment

Remove the STEERING LEVER  for backrest adjustment

Remove the LEVER  for seat height adjustment

Remove the OUTER COVER  on the front seat

Remove the THIGH SUPPORT  on the front seat

Remove SEAT COVER WITH CUSHION 

When replacing the seat frame: REMOUNT COMPONENTS 

• F56/57: 

  Detach cable linkage (1) from holders (2) and (3).

• Shift the rear seat backrest (5) into an upright position.

• Loosen screws (4).
• Completely remove the rear seat backrest (5) to the top.

  If necessary, feed out the relative cable and set aside rear seat backrest.

Courtesy of BMW OF NORTH AMERICA, INC.