REP-TAT-P-5218-02 Install lumbar support

Insert the adjuster (2) with Bowden cable in the backrest frame.
Replace the blind rivets (1) .
Parts: Blind rivet
Secure adjuster (2) with the blind rivet (1) on the backrest frame.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach lumbar support (3) in holders (1) and backrest frame (2) .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work

Install the BACKREST COVER with the cushion

Install SIDE AIRBAG from front seat

Install the TRIM at the bottom of the aperture

Install the REAR PANEL from the front seat backrest

Install TRIM for backrest release

Install the OUTER COVER on the front seat

Install the LEVER for seat height adjustment

Install the STEERING LEVER for backrest adjustment

Install the COVER for backrest adjustment