Replacing upholstery for front passenger seat (Except John Cooper Works)
IMPORTANT:
US/CDN front passenger seat (with CIS mat) only:
A faulty facing may only be replaced completely with the CIS mat.
New facing is supplied with CIS mat and, if necessary, seat heating.
After installation, the CIS mat must be enabled with the diagnostic system.
Individual parts not available.
A faulty facing may only be replaced completely with the CIS mat.
New facing is supplied with CIS mat and, if necessary, seat heating.
After installation, the CIS mat must be enabled with the diagnostic system.
Individual parts not available.
Operation is described in:
- Replace the left or right front passenger seat cover. Refer to: REPLACING SEAT COVER FOR FRONT PASSENGER SEAT (NORMAL/MANUAL) or REPLACING SEAT COVER FOR FRONT PASSENGER SEAT (SPORT/MANUAL)
Enabling seat occupancy sensor (CIS mat):
- Connect BMW diagnostic system
- Carry out service function or test module