Removing and installing/replacing trunk cross member trim panel (Cooper Convertible)

Preliminary work needed  :

• Remove left BACKREST for rear seat and/or right BACKREST
• Remove left TRUNK WHEEL ARCH TRIM  and right TRUNK WHEEL ARCH PANEL .

Removal: 

Take out and remove the trim panel (1) over the lashing points (2) upwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation  :

Mount trim panel (1) and install over the lashing points (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install left BACKREST or for rear seat and/or right BACKREST
• Install left TRUNK WHEEL ARCH TRIM  and right TRUNK WHEEL ARCH PANEL .