51 24 130 Removing and installing/replacing striker for tailgate lock

Necessary preliminary tasks: 

• Remove TRIM ON TAIL PANEL 

REMOVAL: 

Release bolts (1) and remove striker (2).

Fig 1: Striker And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION: 

Position striker (2) and tighten screws (1).

Tightening torque 51 24 2AZ .

Fig 2: Striker And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Adjust REAR LID LOCK