51 48 001 Removing and installing/replacing insulation lining on engine hood/bonnet

Work explained using the F56 MINI COOPER ECE as an example, details may deviate in other models.

Removal: 

Remove the clips from the damping material.

Remove damping material.

Fig 1: Locating Damping Material Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Parts note: 

Replace faulty clips.

Position the damping material and secure using clips.

Fig 2: Locating Damping Material Clips

Courtesy of BMW OF NORTH AMERICA, INC.