51 12 828 Removing and installing/replacing guide for bumper, rear left or right

Necessary preliminary tasks:

Removal:

Release screw (1).

Fig 1: Locating Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Detach cable (2) and remove guide (3).

Fig 2: Cable, Guide And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Place guide (3) and fix with nuts (1).

Tightening torque 51 12 2AZ .

Attach cable (2).

Fig 3: Cable, Guide And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screw (1).

Fig 4: Locating Screw

Courtesy of BMW OF NORTH AMERICA, INC.