65 50 200 Removing and installing (replacing) central instrument cluster

Special tools required:

Necessary preliminary tasks:

Removal:

Unclip and remove cover (1) upwards with special tool 00 9 327 .

Fig 1: Removing Cover Upwards With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 2: Locating Instrument Panel Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock lock (1) with screwdriver in direction of arrow and at the same time pull central instrument towards passenger compartment.

Fig 3: Unlocking Lock With Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Remove central instrument (2).

Fig 4: Locating Central Instrument Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Installation:

Join plug connections (1) to central instrument (2) and lock.

Fig 5: Plug Connections Of Central Instrument

Courtesy of BMW OF NORTH AMERICA, INC.

Press latch mechanism (1) on central instrument (3) on left and right in direction of arrow.

Latch mechanism (1) must engage on left and right behind IHKA controls (2).

Fig 6: Pressing Latch Mechanism On Central Instrument

Courtesy of BMW OF NORTH AMERICA, INC.

Press on central instrument at top on instrument panel and engage.

Tighten down screws (1).

Fig 7: Locating Central Instrument Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Engage cover (1) correctly in instrument panel (2).

Fig 8: Locating Instrument Panel Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Up to build date 11/2014: Carry out VEHICLE PROGRAMMING AND ENCODING .