63 99 110 Replacing bulb for daytime driving lights, left/right

WARNING: Follow the SAFETY INSTRUCTIONS for handling bulbs/light sources (exterior lights).

Removal:

Release cover (1) by turning counter clockwise and remove from wheel arch panel (2).

Fig 1: Cover And Wheel Arch Panel

G11650085

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect the connector (1).

Fig 2: Daytime Driving Lights Connector

G11650086

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock bulb holder (1) and pull out of daytime running light (2).

Fig 3: Bulb Holder And Daytime Running Light

G11650087

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Note BULB TYPE .

Join bulb holder (1) in daytime running light (2).

NOTE: Make sure bulb holder (1) is correctly fitted and engaged in daytime running light (2).

Fig 4: Bulb Holder And Daytime Running Light

G11650087

Courtesy of BMW OF NORTH AMERICA, INC.

Connect the plug (1).

Fig 5: Daytime Driving Lights Connector

G11650086

Courtesy of BMW OF NORTH AMERICA, INC.

Join cover (1) in wheel arch panel (2), and turn clockwise up to limit position.

NOTE: Make sure cover (1) is correctly locked.

Fig 6: Cover And Wheel Arch Panel

G11650085

Courtesy of BMW OF NORTH AMERICA, INC.