REP-TAT-P-5112-02 Installing the rear bumper cover

Follow-up work 

• Install rear BUMPER COVER 
• Install the left and right TAIL LIGHTS 
• Install the BUMPER COVER TRIM 

Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the bumper cover (1) with the help of a support person.

Connect and lock the connectors for the rear fog lights and/or ultrasonic sensors.

• Release the bumper cover (1) from the detents in dashed line area.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten all bolts (arrows).
• Tighten screws (1) left and right.

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the wheel arch trim (1) correctly and clip it in at the clips (2) and (3).
• Engage the wheel arch trim (1) at the detents along the dotted line.