51 13 102 Removing and installing/replacing cover on front left or right wheel arch

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

If necessary, release clip on front wheel arch cover (1).

Bend wheel arch panel (1) inwards slightly and release clip (2).

Installation note:

If necessary, replace faulty clip (2).

Fig 1: Identifying Wheel Arch Panel And Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Feed cover (1) in area (A) towards front out of bumper.

Release cover (1) from clips (2); if necessary, disconnect associated plug connection and remove.

Installation note:

If necessary, replace faulty clips (2).

Fig 2: Releasing Cover From Clips

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing with USA national version:

Remove SIDE MARKER LIGHT .