51 13 085 Removing and installing/replacing trim strip on engine hood/bonnet (cowl panel)

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Risk of damage!
Do not bend trim strip (1) and chrome strip (2) during removal.

Carefully detach trim strip (1) in direction of arrow from hood/bonnet.

NOTE: To remove, if necessary tape off hood/bonnet with adhesive tape and remove trim strip (1) with a suitable tool.

Fig 1: Detaching Trim Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure chrome strip (2) is correctly seated on trim strip (1), reinstall chrome strip (2) if necessary.

Pay attention to center marking on trim strip (1) and hood/bonnet.