51 43 201 Removing and installing or replacing trim panel for roof pillar at front (A-pillar), left or right

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Read and comply with SAFETY REGULATIONS for working on vehicles with airbag systems.

IMPORTANT: Do not use any sharp-edged tools to remove the trim panel (risk of damage to head airbag).

Lever out protective cap (1).

Fig 1: Identifying Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 51 43 1AZ .

Detach edge protection (4) in area of trim panel (3).

Undo clips (2) and remove trim panel (3) upwards.

Fig 2: Removing Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clips (1) and guide (2) must not be damaged.

Make sure edge protection (4) is correctly seated.

Fig 3: Identifying Clips And Guide

Courtesy of BMW OF NORTH AMERICA, INC.