51 16... Removing and installing/replacing decorative ring on gearshift lever cover

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Unclip frame trim (1) at marked locations and remove.

Fig 1: Identifying Gearshift Lever Cover Frame Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining tabs (1) of frame trim (2) must not be damaged or missing.

Fig 2: Identifying Frame Trim Retaining Tabs

Courtesy of BMW OF NORTH AMERICA, INC.