51 16... Removing and installing the lid on the rear center console cover

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Lever out the lid (1) from the cover of the rear center console (2) with special tool 64 1 020 .

Fig 1: Removing Lid From Rear Centre Console Cover

Courtesy of BMW OF NORTH AMERICA, INC.

For versions with a 12 V power socket:

Lever out the lid (1) from the cover of the rear center console (2) with special tool 64 1 020 .

Fig 2: Identifying Center Console Lid And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining tabs (2) of service cap (1) must not be missing or damaged.

Fig 3: Identifying Service Cap And Retaining Tabs

Courtesy of BMW OF NORTH AMERICA, INC.