51 16 200 Removing and installing/replacing storage compartment

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Turn cup holder (1) aside. The required operations are described at:

REMOVING AND INSTALLING/REPLACING FRONT CUPHOLDER

Fig 1: Identifying Cup Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Undo screw (1) from storage compartment (2).

Pull storage compartment (2) toward the back slightly, unclipping it at the marked areas.

Feed out storage compartment (2) toward the side.

Fig 2: Identifying Storage Compartment And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clips (2) of storage compartment (1) must not be damaged or missing.

Fig 3: Identifying Storage Compartment And Clips

Courtesy of BMW OF NORTH AMERICA, INC.