51 45 435 Removing and installing/replacing cover for instruments

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 325

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Carefully lever out instruments cover (1) with special tool 00 9 325 .

Installation note:

Ensure that the instrument cover (1) is correctly engaged in the marked area.

Fig 1: Removing Instrument Cover Using Special Tool (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fig 2: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining clips (3), marked retaining pins and retaining tabs on instrument cover (1) must not be damaged or missing.

Replacement

Modify SWITCH FOR HAZARD WARNING FLASHERS (2).

Fig 3: Locating Instrument Cover Retaining Pins And Tabs

Courtesy of BMW OF NORTH AMERICA, INC.