51 45 181 Removing and installing/replacing instrument panel trim, bottom right

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 325

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary work:

Remove FRONT DOOR SILL COVER STRIP

Release screws (2) on bottom right instrument panel trim (1).

Using special tool 00 9 325 , unclamp instrument panel trim at bottom right (1), at marked area, from outside to inside.

Fig 1: Removing Trim Panel Using Special Tool (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining clips (2) must not be damaged or missing.

Replacement

Modify retaining clips (2) on bottom right instrument panel trim (1).

Fig 2: Identifying Retaining Clips On Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.