51 71 412 Removing and installing/replacing rear spoiler

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove BOTH COVERS FOR REAR WINDOW FRAMES

Lever out seal plugs (1) and release screws underneath.

Tightening torque 51 71 7AZ .

Unfasten screws (2).

Tightening torque 51 71 7AZ .

Fig 1: Identifying Seal Plugs And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Detach rear spoiler (1) in upward direction from clips (2).

Fig 2: Detaching Rear Spoiler From Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace faulty clips (1).

Check welded connection of inner and outer shells are free of damage (visual inspection).

Fig 3: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Guide (1), bolts (2) and gaskets (3) must not be damaged or missing.

Fig 4: Identifying Guide, Bolts And Gaskets

Courtesy of BMW OF NORTH AMERICA, INC.