51 48 001 Removing and installing/replacing insulation lining on engine hood/bonnet
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Work shown on R58 COOPER SD by way of example, deviations in detail are possible in other models.
Remove threaded blind rivet (1) from the noise insulation.
Remove noise insulation.
Installation note:
If necessary, replace faulty threaded blind rivet (1).