51 41 110 Remove and install/replace the driver's side handle recess (front passenger side)

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Unclip the cover (1) with special tool 64 1 020 from the handle recess (2) and loosen the screw below it.

Tightening torque 51 41 3AZ .

Fig 1: Removing Cover With Special Tool (64 1 020)

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip the handle recess (1) with special tool 64 1 020 starting at the rear.

Disconnect the associated plug connections and remove the handle recess (2).

Fig 2: Removing Handle Recess Using Special Tool 0 496 569 (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guides (1) and marked spring clips for handle recess (2) must not be damaged or missing.

Fig 3: Locating Handle Recess Marked Spring Clips And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify POWER WINDOW SWITCH .