51 31 045 Removing and installing/replacing trim cover on A-pillar (outer), left or right

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove TRIM STRIP FROM SIDE PANEL

NOTE: Illustrations originate from R56.

Release screws (1).

Release trim (2) at clips (3) and remove.

Installation note:

If necessary, replace faulty clips (3).

Fig 1: Identifying Trim, Clips And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If necessary, replace faulty nut inserts (1) on A-pillar (2).

Fig 2: Identifying Nut Inserts On A-Pillar

Courtesy of BMW OF NORTH AMERICA, INC.