11 28 020 Replacing tensioning device for alternator drive belt (N18)
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Tensioning device is subject to spring bias (danger of injury!)
.
Necessary preliminary tasks:
- Remove right CHARGE-AIR DUCT .
- Remove DRIVE BELT .
Unfasten screws (2).
Tightening torque: 11 28 1AZ .
Remove tensioning device (3).
Assemble engine.