11 00 680 Replacing screw plug in crankcase lower half (N18)
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove EXHAUST SYSTEM .
Use a hexagon socket to loosen the screw plug (1) with sealing ring.
If the screw plug (1) is installed with a square drive, it must be handled with special tool (2) Hazet order number. 3702.
Tightening torque: 11 11 8AZ .