11 13 000 Removing and installing, sealing or replacing oil sump (N18)
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Necessary preliminary tasks:
- Drain ENGINE OIL .
- Remove transfer box (AWD only).
- Protect exhaust system against oil contamination and cover with suitable materials, clean if required.
Unscrew sump bolts in area of line (1).
Tightening torque: 11 13 2 AZ .
Remove bolt (1) above exhaust manifold using special tools 11 9 582 and 11 9 581 .
Clean sealing surface (1) with special tool 11 4 470 .
IMPORTANT:
Do not remove sealing bead itself.
Use a sharp knife to remove only the protruding or sticking-out parts of sealing beads (1).
Use a sharp knife to remove only the protruding or sticking-out parts of sealing beads (1).
Installation note:
Use LIQUID GASKET 2.2 .
Apply liquid gasket thinly and evenly.
Assemble engine.