61 31 299 Removing and installing/replacing clutch switch module

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INSTRUMENT PANEL TRIM AT BOTTOM LEFT

Disconnect plug connection (1).

Lever out clutch switch module (2) from clutch master cylinder (3) with screwdriver.

Installation note:

Clutch switch module is secured against incorrect installation.

Clutch switch module must snap audibly into place.

Fig 1: Identifying Clutch Switch Module, Clutch Master Cylinder And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.