63 12 007 Removing and installing/replacing left or right Halogen Headlight

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Follow instructions for handling light bulbs (EXTERIOR LIGHTS) .

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Release screws (1). Tightening torque 63 12 1AZ .

Disconnect plug connection (2).

Version with headlight cleaning system:

Pull headlight forwards slightly and disconnect hose connection (3) from high-pressure nozzle (4).

Remove headlight.

Fig 1: Identifying High Pressure Nozzle, Hose Connection, Plug Connection, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Adjust GAP DIMENSIONS by means of adjusting screws (1)

Adjust HEADLIGHTS

Fig 2: Identifying Adjusting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

RETROFIT HALOGEN BULB IN HEADLIGHTS
RETROFIT HALOGEN BULB IN HIGH BEAM HEADLIGHTS
Modify BULB FOR TURN INDICATOR
If necessary, modify high-pressure nozzle of headlight cleaning system. See REMOVING/INSTALLING/REPLACING LEFT NOZZLE or REMOVING/INSTALLING/REPLACING RIGHT NOZZLE .
Modify adjusting screws