61 67 102 Removing and installing/renewing right high-pressure nozzle of headlight cleaning system

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Disengage the expanding rivet (1) and slide the bulkhead (2) back a little.

Fig 1: Identifying Expanding Rivet And Bulkhead

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 63 12 3AZ .

Remove high-pressure nozzle (2) in direction of arrow.

Unlock and disconnect hose connection (3).

Installation note:

Make sure the guide (4) is correctly seated in the tab (5).

Fig 2: Removing High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Disengage the holder for the chrome trim (1) on the latch mechanism (2).

Remove the holder for the chrome trim (1) in direction of arrow of the high-pressure nozzle (3).

Fig 3: Removing Chrome Trim Holder

Courtesy of BMW OF NORTH AMERICA, INC.