31 35 000 Removing and installing/replacing front stabilizer

Necessary preliminary tasks:

Release nut (1); if necessary, grip dihedron (2) or hexagon socket.

Tightening torque 31 35 1AZ

Installation note:

Replace self-locking nut.

Fig 1: Releasing Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release left and right screws (1).

Tightening torque 31 35 3AZ .

Remove anti- roll bar (2) from wishbone holder.

Installation note:

Replace RUBBER MOUNT for anti- roll bar.

Fig 2: Identifying Stabilizer Bar And Screws

Courtesy of BMW OF NORTH AMERICA, INC.