41 5.... Removing and installing door

IMPORTANT: Do not damage adjoining body components.

Open door.

Release screw on connector frame.

Front door:

Tightening torque 41 51 3AZ .

Rear door:

Tightening torque 41 51 3AZ .

Fig 1: Locating Screw On Connector Frame

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Secure door against closing.

Release screw (1) on door stop.

Tightening torque 51 21 6AZ .

IMPORTANT: Secure door against falling.

Fig 2: Identifying Screw On Door Stop

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2) and pull out of hinges.

Front door:

Tightening torque 41 51 1AZ .

Rear door:

Tightening torque 41 51 1AZ .

Pull plug connection from door post, unlock by pulling out bar and detach.

Unhinge door by moving upwards and place it on a suitable surface.

Installation:

If necessary, adjust DOOR .

Fig 3: Pulling Plug Connection From Door Post

Courtesy of BMW OF NORTH AMERICA, INC.