63 12 007 Removing and installing/replacing left or right Halogen Headlight
WARNING:
Follow instructions for handling light bulbs (EXTERIOR LIGHTS) .
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
Release screws (1). Tightening torque 63 12 1AZ .
Disconnect plug connection (2).
Version with headlight cleaning system:
Pull headlight forwards slightly and disconnect hose connection (3) from high-pressure nozzle (4).
Remove headlight.
Installation note:
Adjust GAP DIMENSIONS by means of adjusting screws (1)
Adjust HEADLIGHTS
Replacement:
- RETROFIT HALOGEN BULB IN HEADLIGHTS
- RETROFIT HALOGEN BULB IN HIGH BEAM HEADLIGHTS
- Modify BULB FOR TURN INDICATOR
- If necessary, modify high-pressure nozzle of headlight cleaning system. See REMOVING/INSTALLING/REPLACING LEFT NOZZLE or REMOVING/INSTALLING/REPLACING RIGHT NOZZLE .
- Modify adjusting screws