61 67 083 Removing and installing/replacing left or right high-pressure nozzle of headlight washer system

Necessary preliminary tasks: 

• Remove headlight. See REMOVING/INSTALLING HALOGEN HEADLIGHT , REMOVING/INSTALLING XENON HEADLIGHT , or REMOVING/INSTALLING ADAPTIVE HEADLIGHT .

Release screws (1).

Tightening torque 63 12 3AZ .

Remove high-pressure nozzle (2) in direction of arrow.

Installation note: 

Make sure guide (3) is correctly seated in lug (4).

Fig 1: Removing High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Press holder for chrome trim (1) in direction of arrow off high-pressure nozzle (2).

Fig 2: Pressing Chrome Trim Holder Off High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.