51 13 375 Removing and installing/replacing cover on left or right rear roof pillar (C-pillar)

Release screws (1) and remove trim (2).

Tightening torque 51 13 4AZ .

Fig 1: Identifying Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

The clamping strips (1) must not be damaged.

Fig 2: Identifying Clamping Strips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure the side window (1) is correctly seated in the clamping strips (2).

Observe GAP DIMENSIONS .

Fig 3: Identifying Side Window And Clamping Strips

Courtesy of BMW OF NORTH AMERICA, INC.