51 16 206 Removing and installing/replacing center armrest
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
Version with telephone:
- Remove STORAGE COMPARTMENT
Version with telephone:
Disconnect plug connection (1).
Release cable clip (2) and feed out cable (3).
Version without telephone:
Release side screws on covers (1).
Unclip covers (1) in direction of arrow from each other and remove.
Release screw (2).
Unclip drinks holder (3) in upward direction and remove.
Release screws (1) at sides.
Release screws (2) and lift out center armrest (3).
Tightening torque 51 16 5AZ .
Replacement:
- Remove LID FOR CENTER ARMREST
- Remove storage tray (1).
- Release screw (2) and remove cover (3).
- Remove EJECT BOX