41 34 038 Outer Tail Panel Section Replacement

WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, and 2006 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Read contents of Body, General .

Spot-weld bonding is used for the first time on the E65. A specific procedure must be followed here.

Following new body parts are required:

Rear trim outer skin

Fig 1: Rear Trim Outer Skin
Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Release bond in areas (2) with hot air blower.

Installation:

Apply adhesive in areas (2).

Fig 2: Open Weld Joint Areas And Adhesive Application Areas

Courtesy of BMW OF NORTH AMERICA, INC.